Table Of Content

LED lighting and state-of-the-art high-efficiency systems throughout the temple, so it will operate in an efficient way for many years." When the temple was completed, Brigham Young was not completely satisfied with the tower and dome, stating that it looked too short and squatty. He suggested having it fixed, but the Saints were so excited to have the temple finished that Brigham Young did not push the suggestion.
Open House and Re-dedication of the St. George Utah Temple
The moldings in the historic temple and the north addition are wood or glass-fiber-reinforced gypsum. Due to the large amount of ground water on the site, the historic building (1877) required special effort to ensure a proper foundation. After packing the site with lava rock using a cannon as a pile driver, the first layer of foundation stones was laid using large blocks of locally quarried basalt. The exterior walls were built from another local stone, red sandstone, stacked and grouted together. The upper portion of the existing annex will also be demolished and replaced with a design that will complement the historic structure. Additionally, limited seismic upgrades will be made by adding steel to the temple’s original wood trusses.
Paving the Road in Front of the St. George Utah Temple
Red Cliffs Utah Temple dedication and open house details - Deseret News
Red Cliffs Utah Temple dedication and open house details.
Posted: Mon, 29 Jan 2024 08:00:00 GMT [source]
The green color represents the rice fields and the farming community in the area. The carpet carving design incorporates the almond flower to coordinate with the art glass. The rug designs are reminiscent of an open field of local wildflowers and the California poppy, the state flower.
Red Cliffs Utah Temple to soon open for public open house in St. George - KUTV 2News
Red Cliffs Utah Temple to soon open for public open house in St. George.
Posted: Mon, 29 Jan 2024 08:00:00 GMT [source]
West End Addition to the St. George Utah Temple Rising
Similar to the Salt Lake Temple, the newly renovated St. George temple will reflect elements of the temple’s original historic design. Latter-day Saints built temples in Kirtland, Ohio, and Nauvoo, Illinois, only to abandon them after persecution forced them from their homes and, finally, to Utah. The church released multiple photos from inside the temple, including the celestial room and baptismal font. The fence surrounding the temple site was installed in the 1977 renovation. In the new renovation this steel fence has been sand-blasted and painted a dark bronze to match the new site elements. Much of the existing planting and shrubbery was replaced or added to make the grounds lusher and greener and provide better views and photo opportunities of the temple itself.
On April 6, 1877, the St. George temple was formally dedicated, with Daniel H. Wells, second counselor to Brigham Young, offering the dedicatory prayer in the opening session of general conference, which was held in the temple. Despite being in failing health, Brigham Young offered a few remarks. Wilford Woodruff, a latter-day Apostle who was the first president of the St. George temple and later the Church’s fourth President, oversaw the recording of the temple ordinances. Previously, the temple ordinances had been passed on by memory and word of mouth since being revealed to Joseph Smith in Nauvoo, Illinois, in the 1840s. The temple is one of 28 houses of the Lord in the state of Utah that are either dedicated and operating or under construction or renovation.

A brief timeline of the St. George temple
The open house and dedication come on the heels of similar events conducted for the recently renovated and rededicated St. George Utah Temple, the Church’s oldest house of the Lord still in operation. Utah is home to nearly 2.2 million Latter-day Saints, and the St. George Utah Temple is one of the Church’s 28 houses of the Lord in the state that are dedicated or under construction. The finished temple was dedicated on April 6, 1877, as the Church held its general conference that spring at the temple to coincide with the dedication. Windows have been replaced, matching the historical profiles and details but upgraded to insulated triple panes.

Ongoing or upcoming temple open houses
Excavation around the temple's foundation will also be required to install new mechanical heating and cooling systems. The 257-foot high Los Angeles California Temple looms over famous Santa Monica Boulevard in Westwood. The spacious grounds are filled with a dazzling array of foliage including—to name a few—Canary Island Pine trees, several varieties of palm trees, Bird of Paradise trees, olive trees, and rare Chinese Ginkgo trees.
The stone floor consists of Crema Beige (Iran), Emperador Light (Turkey), Inca Gold (Pakistan), Verde Lichen (Iran), Rojo Alicante (Spain), and Vanilla (Turkey) marble. Colors were chosen to correspond with the fabrics and represent the local flora. The stone pattern throughout the building references other buildings in the area. The stone pattern around the baptistry is pulled from the art glass designs. The Red Cliffs temple was originally referred to as the Washington County Utah Temple when President Nelson announced plans in October 2018 general conference for a second temple in the area.
Inscription Added to the East Facade of the St. George Utah Temple
Six other Utah temples are under construction — Deseret Peak, Ephraim, Heber Valley, Lindon, Smithfield and Syracuse. The exterior art glass has coral, purple, green and gold colors and regional plants — the lower floors with the Indian paintbrush and the upper levels the succulents in hues of purple and green. The art-glass motifs include the florals and colors of the desert, such as the bearclaw poppy, which is the main motif inside.
Additionally, some roads will be temporarily closed for utility construction. The Temple Visitors’ Center will remain open during construction, but there will be no access to the temple site during that time. And the annual Christmas light display will not take place during construction. Eric Jamison, project manager, said, "One of the aspects of this project is preserving the original building. The structure of the building is in fantastic condition given its age. Despite its age, the temple has endured very well." World War II delayed construction of the Los Angeles California Temple for many years.
In November of that year, the St. George site was dedicated, with the cornerstone not laid until March 1873. Workers razed the west entrance to the temple that was added in the 1970s, exposing the old pioneer exterior. The same will be true inside, where floors altered in the 1970s are being redesigned to look more like the 1870s original. Modern workers covered support beams with steel, wrapped columns with fiberglass and drilled steel pipes called micropiles feet deep into the bedrock below the foundation.
Some 250 trees have been added to the temple grounds, with previously existing planting and shrubbery either replaced or added to in enhancing the landscaping. The steel fencing has been painted a dark bronze to complement the temple’s exterior features. Where possible, historic wood doors were abated of their lead paint by a certified abatement company, Eagle Environmental Inc., then repainted and reinstalled in their original location. All the new doors are white painted wood to match the paneling and other details of the historic doors. The original hardware did not meet the current building code and was redesigned using historic hardware precedents. New cast bronze and porcelain hardware was manufactured by Rocky Mountain Hardware in Hailey, Idaho.
The walls of the temple were actually made out of the red sandstone so prevalent in the area and then plastered over so that the temple would be white. The Saints worked tirelessly over five-and-a-half years to complete the temple. By the time it was finished, the Saints had used a million feet of lumber, which had been hand-chopped and hauled between forty and eighty miles.
Work crews encountered pioneer craftsmanship throughout the renovation, especially while structurally reinforcing the temple’s stone foundation. To build the original foundation, pioneer crews used a heavy cannon as a pile driver to put stabilizing materials in the swampy ground. The north and west additions to the temple were rebuilt to match the original architecture of the building. The temple also is now more accessible, with added elevators, better stairs, walkways and hallways.
No comments:
Post a Comment